This easy-to-remove connector is highly recommended when installing a booster, pool pump, or even a filter, as it allows you to replace this equipment very quickly.

Mixed Alliance x3

Glued 50 mm from the inside.

Screws 1 1/2" from the outside.

Optimal for transporting liquids under pressure from +1 to +60°C and can be used in water supply and water treatment systems.

Diameter: 50 mm

Weight: 157 g

Pressure resistance: 16 bar

Material: unplasticized polyvinyl chloride PVC-U

Holds a 7.6 cm tablet (tablets not included).

Material: plastic.

You can buy chlorine tablets " here "

MULTIFUNZIONE BLIST - chlorine tablets for disinfection of water in swimming pools, containing a flocculant. 81% of tablets. It is used for disinfection of pool water, highly resistant to photolysis and evaporation. The tablets are inserted into skimmers.

Warning: Store indoors, out of reach of children.

You can also put in floating containers, you can buy a floating container " here "

Product weight:

Tablets with active oxygen based on potassium peroxomonosulfate for water disinfection in pools over 20 m³

For primary use, 1 tablet per 20 m³ of water is required.

For further disinfection, it is necessary to put one pill every week in the skimmer (depending on the temperature) per 20 m³ of water.

You can also put in floating containers, you can buy a floating container " here "

Weight of 1 tablet: 200 g

Container weight 1 kg

MULTIFUNZIONE BLIST - chlorine tablets for disinfection of water in swimming pools, containing a flocculant. 81% of tablets. It is used for disinfection of pool water, highly resistant to photolysis and evaporation. The tablets are inserted into skimmers.

Warning: Store indoors, out of reach of children.

You can also put in floating containers, you can buy a floating container " here "

Product weight:

Tablets with active oxygen based on potassium peroxomonosulfate for water disinfection in pools over 20 m³

For primary use, 1 tablet per 20 m³ of water is required.

For further disinfection, it is necessary to put one pill every week in the skimmer (depending on the temperature) per 20 m³ of water.

You can also put in floating containers, you can buy a floating container " here "

Weight of 1 tablet: 200 g

Container weight 5 kg

This set will require a good pump to connect. The recommended pump power is from 3000 liters per hour. The more powerful your filtration equipment is, the more effectively you can use this kit.

The cleaning kit can be used to maintain pools of any diameter and any size. It does not matter what kind of pool you have - round or rectangular, frame or bulk, depth 60 cm or 132 cm. The main thing is that there is something to connect the hose 7.5 meters long that comes with this kit.

Included

• Telescopic tube (2.79 m, diameter 29.8 mm)
• Net
• 2 nozzles
• Brush
• Filter flask (underwater skimmer)
• Corrugated hose (7.5 m)
• Adapters - 1 pc

Intended for hermetic connection of pipes in swimming pool water treatment systems.

Connection Type: Glue

Material: Unplasticized polyvinyl chloride (PVC-U).

Angle: 45 degrees

Pressure resistance: 16 bar

Diameter: 50 mm.

Material: Unplasticized polyvinyl chloride (PVC-U).

90 degrees

Diameter — 50 mm.

The IML Roma pool water filter is designed for mechanical purification of pool water. The filter material is quartz sand.

The IML Roma filter is made from a single welded piece, blown using high density PE-HD.

The filter is opened with a metal band between the valve and the filter housing.

Includes monometers and manual air/water purge․

The floor stand provides maximum stability for the filter.

Attention! Sand loading is not included in the package. The filter requires a pump, which is purchased separately.

Optimum solution for pools up to 35 m³

Consumption: 7 m³

Maximum water temperature: 50 °C

Filtration rate: 50 m³/h/m²

Sand capacity: 50 kg

Sand fraction 0.5-1 mm

Net weight of the filter: 10 kg

Product dimensions

• А-720 mm
• H-780mm
• С-922 mm
• D-503 mm
• E-453 mm

The IML Roma pool water filter is designed for mechanical purification of pool water. The filter material is quartz sand.

The IML Roma filter is made from a single welded piece, blown using high density PE-HD.

The filter is opened with a metal band between the valve and the filter housing.

Includes monometers and manual air/water purge․

The floor stand provides maximum stability for the filter.

Attention! Sand loading is not included in the package. The filter requires a pump, which is purchased separately.

Optimal solution for pools up to 65 m³

Flow rate: 11 m³

Maximum water temperature: 50 C°

Filtering speed: 50 m³/h/m²

Sand capacity: 90 kg

Sand grain size 0.5-1 mm

Net weight of filter: 10 kg

Product dimensions

• A-877 mm
• B-937 mm
• C-1079 mm
• D-503 mm
• E-553 mm

Tangit 1000 ml adhesive for PVC (PVC-U) in a can with a brush from Henkel is used for connecting pipes, fittings, valves made of rigid PVC in drinking water and gas supply.

Ingredients: PVC-U, tetrahydrofuran, (THF stabilized), methyl ethyl ketone, cyclohexanone.

Density: 0.96 g/ml.

Heat resistance: Corresponds to the heat resistance of PVC.

Resistance: adhesive joints are water resistant, chemically resistant to inorganic acids, depending on the resistance of the pipes, curing time, compressive load, operating temperatures, type of acid, and its concentration.

Tangit 250 ml adhesive for PVC (PVC-U) in a can with a brush from Henkel is used for connecting pipes, fittings, valves made of rigid PVC in drinking water and gas supply.

Ingredients: PVC-U, tetrahydrofuran, (THF stabilized), methyl ethyl ketone, cyclohexanone.

Density: 0.96 g/ml.

Heat resistance: Corresponds to the heat resistance of PVC.

Resistance: adhesive joints are water resistant, chemically resistant to inorganic acids, depending on the resistance of the pipes, curing time, compressive load, operating temperatures, type of acid, and its concentration.

Tangit 500 ml adhesive for PVC (PVC-U) in a can from Henkel is used for connecting pipes, fittings, valves made of rigid PVC in drinking water and gas supply.

Ingredients: PVC-U, tetrahydrofuran, (THF stabilized), methyl ethyl ketone, cyclohexanone.

Density: 0.96 g/ml.

Heat resistance: Corresponds to the heat resistance of PVC.

Resistance: adhesive joints are water resistant, chemically resistant to inorganic acids, depending on the resistance of the pipes, curing time, compressive load, operating temperatures, type of acid, and its concentration.

Hose connections

For 38 mm hoses.

Pool cleaning hose, you can buy " here "

Make your pool a beautiful oasis with this multicolor LED fountain.

Enjoy the light show, especially at night when colorful beams shine through the water cascade.

Lights up in 4 vibrant colors: white, red, blue and green

Hydroelectric generator built-in power - LED lighting (no batteries or electrical connection required). The necessary electricity is generated by a hydrogenerator under the action of the flow of water coming from the pump.

Suitable for all types of pools․

Required pump flow: 1000-3000 gallons (3.785-11.355 l/h)

Includes an adapter for connecting to 32 and 38 mm hoses

The curved brush is designed for cleaning the internal surfaces of the pool.

Thanks to its moderately hard bristles, it perfectly removes dirt, slime and other stubborn dirt from the walls and bottom of the pool.

The brush has a clip-type mount that securely holds the brush on the handle. Can only be used in conjunction with a 29.8 mm "telescopic tube" not included.

Product dimensions

• Material: plastic
• Length: 41 cm
• Width: 406mm
• Nozzle inner Ø: 29.8 mm